A: Carbomer 1G pure water 99ml material B: Triethanolamine drops C: antibacterial agent 0.5ml Tools: mixing stick, spoon, PH test paper, empty jar.

Practice: 1. Pour material A into the empty tank and stir evenly. As lumps, crush with a mixing stick. You can also add half the water directly and the rest after forming a clear gel antibacterial agent. Stop stirring until kapom has absorbed enough of the expanded water to not see the lumps. It takes about 2 to 3 hours to fully expand. To shorten the time of gel formation, heat water, heat, and stir for about 10-30 minutes. Neutralize with alkali.

Add drop by drop and measure PH while stirring. 7:7,PH of scotch tape. It is essential for the formation of clear gels. First, add a drop of neutralizer, measure the PH, and repeat the process until the PH reaches 7. So you can easily master the technique and you can make it easily. Add antibacterial agent, stir well, gel completely.

B.2 Carbomer gel (50ML:1g carbomer powder) in a 50ML dry beaker. If lumpy, use a spoon. Add 25 ml of purified water, add during stirring, so that kapom fully absorbs the water and dissolves. This step is very key, must let the carbon filled with water, generally add water to stir, placed for a few hours generally not urgent, before going to bed at night can be configured, 24 hours later can be deployed, carbon can be completely dissolved. To make it run faster, heat it up in a water bath and stir it while it's hot. It absorbs water faster even when heated. It takes about 10 to 30 minutes to dissolve kapom. 3 Add the alkali solution to the dropper, add it while stirring, measure PH value, adjust PH value 7, gel is successful! (with triethanolamine as lye)4, add the remaining water. The amount of gelling agent prepared is about 50ml. As long as the carbon concentration is controlled at about 0.8, it can be directly prepared with other raw materials, preferably about 0.5. Usage: the dosage is 0.5, can make beautiful, fine texture gel. For example, to make 100 milliliters of gel, you only need to add 25 grams of pre-made 2 polymer gels and then add 75 milliliters of the recipe. 2 Concentrated transparent gel 100ml 2g gel powder + 98ml pure water +0. 5ml antibiotic + neutralizer. DIY Carbomer gel.